[CRISIS DISPATCH & FLUID EXTRACTION]

24/7 EMERGENCY FLOOD & WATER EXTRACTION

IICRC S500 STANDARD • HIGH-LIFT TRUCK EXTRACTION • CATEGORY 1 TO 3 FLUID ARREST

Time is the irreversible variable in water damage mitigation. On the Texas Gulf Coast, ambient relative humidity accelerates the microbial degradation clock: Category 1 (clean supply water) degenerates into Category 2 (grey water) within 24 hours, and reaches pathogenic Category 3 (black water) within 48 to 72 hours.

High-Capacity Extraction Fleets: Our rapid crisis teams deploy truck-mounted, high-lift vacuum extraction units capable of pulling hundreds of gallons per minute from deep pile carpets, structural padding, hardwood subflooring, and concrete slabs. Physical extraction is 1,200 times more energy efficient than evaporation alone.

Microbial Growth Interception: Instantaneous bulk liquid arrest halts capillary moisture wick behind drywall cavities, protecting structural timber and preventing costly Condition 3 mold colonization before it begins.

MOBILE EXTRACTION RIG // READY Commercial dehumidification trailer on standby

OPERATIONAL HARDWARE DOSSIER

HEAVY FLUID EXTRACTION & DRYING

EXTRACTION METHOD	TRUCK-MOUNTED HIGH-LIFT HYDRO-VACUUM
FLEET CAPACITY	8 MOBILE UNITS • 12 DESICCANT TRAILERS
DISINFECTANT CHEM	EPA-REGISTERED BROAD-SPECTRUM BIOCIDE
RESPONSE TIME	< 60 MIN RAPID GULF COAST DISPATCH
COMPLIANCE	IICRC S500 STANDARD OF CARE

[PSYCHROMETRIC DRYING ARCHITECTURE]

INDUSTRIAL STRUCTURAL DEHUMIDIFICATION

DESICCANT & LGR REFRIGERATION • GRAINS PER POUND (GPP) VAPOR MANIPULATION

Structural drying is not guesswork; it is applied physics. Envirogyn manipulates psychrometric vapor pressure differentials to force moisture out of deep, dense structural assemblies—including solid hardwood, structural timber studs, poured concrete foundations, and multi-layer commercial roofing systems.

PSYCHROMETRIC DRYING // LGR & DESICCANTS

LGR & DESICCANT TRAILER DEPLOYMENT

We deploy Low Grain Refrigerant (LGR) units operating under 30 GPP alongside industrial desiccant wheel trailers capable of achieving relative humidities below 15%. Desiccant drying creates an extreme vapor pressure delta between ambient air and bound structural moisture, pulling water molecules out of dense masonry and dense timber assemblies.

CAPACITY: 5,000+ CFM DESICCANTS SUB-30 GPP SPECIFICATION

PSYCHROMETRIC DRYING // BOUNDARY SHEARING

BOUNDARY LAYER SHEARING

High-velocity centrifugal and axial air movers are positioned at precise 45-degree angles to continuously shear the saturated boundary layer of air clinging to wet surfaces. Coupled with daily thermal hygrometric datalogging and non-invasive impedance readings, we track dry-standard equilibrium until baseline Condition 1 is restored.

DIAGNOSTICS: FLIR THERMAL RADIOMETRY DAILY PSYCHROMETRIC LOGS

[CRITICAL MICROBIAL CONTAINMENT]

LICENSED MOLD REMEDIATION (MRC #1611)

TEXAS LICENSED MOLD REMEDIATION CONTRACTOR • 99.97% HEPA NEGATIVE AIR • TDLR MRC #1611

As a state-licensed Mold Remediation Contractor (TDLR MRC #1611), Envirogyn executes remediation work strictly adhering to third-party assessment protocols. In accordance with Texas Occupations Code § 1958.155, when Envirogyn performs physical remediation contracting on a regulated project, an independent licensed Mold Assessment Consultant (MAC) authors the protocol and performs final clearance.

MICROBIAL CONTAINMENT // NEGATIVE PRESSURE

NEGATIVE AIR PRESSURE CONTAINMENT

We erect airtight 6-mil poly isolation chambers complete with triple-flap zipper decontamination airlocks. High-volume Air Filtration Devices (AFDs) equipped with DOP-tested 99.97% HEPA filters establish continuous negative pressure differential (≥ -0.02 in-H2O), ensuring zero microbial sporulation escapes into occupied zones.

FILTRATION: 99.97% @ 0.3 µm HEPA ≥ 4 AIR CHANGES / HOUR

MICROBIAL CONTAINMENT // MECHANICAL ERADICATION

ABRASIVE CLEANING & ENCAPSULATION

Non-salvageable porous building materials (drywall, insulation, tack strip) are bagged in 6-mil poly and removed. Remaining structural lumber undergoes heavy mechanical wire brushing, HEPA vacuuming, and soda/dry-ice blasting to eradicate embedded hyphae, followed by EPA-registered antimicrobial application and institutional-grade antimicrobial encapsulation.

CHEMISTRY: EPA-REGISTERED BIOCIDES CONDITION 1 CLEARANCE READY

[RECOVERY & RESTORATION]

TURNKEY STRUCTURAL RECONSTRUCTION

SEAMLESS POST-CLEARANCE REBUILD • ARCHITECTURAL INTEGRITY • VALUE RESTORATION

Once independent Post-Remediation Verification (PRV) is passed and Form MDR-1 is executed, Envirogyn's construction division handles full architectural restoration, bridging the gap between hazardous abatement and move-in ready perfection.

STRUCTURAL RECONSTRUCTION // FRAMING & DRYWALL

STRUCTURAL & THERMAL FRAMING

Replacing structural load-bearing studs, installing high-performance thermal insulation batt, hanging mold-resistant gypsum drywall (Type X / Greenboard), and precision mudding and taping to Level 4/5 architectural specifications.

SCOPE: FRAMING • DRYWALL • INSULATION CODE-COMPLIANT RESTORATION

STRUCTURAL RECONSTRUCTION // ARCHITECTURAL FINISH

ARCHITECTURAL FINISHING & ASSET VALUE

Hardwood flooring restoration, ceramic and porcelain tile installation, custom baseboards and crown molding, and antimicrobial primer/paint systems. We restore the property to pre-loss condition, eliminating any cosmetic trace of the environmental crisis.

FINISHES: FLOORING • TRIM • COATINGS TURNKEY HANDOFF

[CRISIS MOBILIZATION STANDBY]

DEPLOY RESTORATION & EXTRACTION TASKFORCE

Whether facing an active hurricane storm surge, commercial pipe rupture, or complex multi-floor mold remediation protocol, our licensed response units are on 24/7 active standby across the Texas Gulf Coast.

SUBMIT PRIORITY INTAKE →