In-House Lab Turnaround
TDLR LAB #1050 & AIHA EMLAP #289849
A single-source environmental engineering firm, licensed building restoration contractor, and AIHA-EMLAP / TDLR-accredited microbiology laboratory delivering court-defensible data, rapid structural recovery, and strict statutory independence across Houston, Galveston, and the Upper Texas Gulf Coast.
TDLR LAB #1050 & AIHA EMLAP #289849
24/7 S500 Water & S520 Containment Fleet
TDLR, AIHA, TX DSHS, ASCP, TREC & TDA
Tex. Occ. Code § 1958.155 Air-Gap Enforced
DIV 01 // TDLR MAC #1544
Independent site assessments, commercial real estate environmental due diligence, FLIR thermal moisture forensics, lead-paint XRF inspections, and statutory mold clearance protocols.
DIV 02 // TDLR MRC #1611
Emergency water extraction, psychrometric structural drying, negative-pressure HEPA bio-containment, and code-compliant mold and combustion recovery engineered to pass independent clearance.
DIV 03 // TDLR LAB #1050
Direct microscopy laboratory directed by an ASCP Board-Certified Medical Laboratory Scientist. Accepting walk-in Texas City drop-offs, contractor bulk shipments, and mail-in kits nationwide.
Close commercial transactions on time with lender-accepted Phase I ESAs, historical oil/petrochemical record audits, Phase II Geoprobe soil/groundwater testing, and asbestos/lead pre-renovation surveys.
Protect buyers and indoor air quality without scare tactics. Our independent licensed assessors map hidden wall moisture via FLIR thermal imaging, collect ASTM D7391 spore traps, and issue XRF lead-paint reports within your option period.
When pipes rupture, roofs leak, or storm surge floods your structure, rapid extraction prevents secondary microbial amplification. Our certified restoration crews deploy HEPA air scrubbers, containment barriers, and desiccant drying under independent clearance documentation.
Eliminate carrier delays with our Gulf Coast in-house microbiology laboratory. Log air cassettes, swabs, and bulk samples in minutes via eCoC and drop off in Texas City or ship overnight for same-day or 24-hour signed Certificates of Analysis.
Sworn clearance documentation required by Texas real estate buyers, underwriters, and insurance carriers.
Quantitative fungal counts (spores/m³), indoor vs. outdoor ratios, and MLS(ASCP) scientist sign-off.
CERCLA Innocent Landowner defense, federal/state regulatory radius logs, and lender REC opinions.
Line-by-line containment specs, engineering controls, and PRV clearance pass criteria for contractors.
Anchored at our Texas City headquarters and accredited microbiology lab, Envirogyn dispatches consulting engineers and restoration crews across Galveston, Harris, Brazoria, and Chambers Counties.
Direct walk-in spore trap, tape-lift & bulk sample intake (M–F 8:00 AM–5:00 PM) plus central Gulf Coast fleet mobilization.
View Hub Capabilities →“Envirogyn found moisture behind my walls that three other inspectors missed. Their thermal tech is the real deal.”
Skip hardware-store settling plates. Order our calibrated air/surface kit with prepaid courier return and direct microscopic analysis at TDLR LAB #1050.
Clear answers on Texas mold law, turnaround times, accredited laboratory submission, and emergency restoration dispatch.
Under Texas Occupations Code § 1958.155 and 16 TAC § 78.70, it is illegal for one person or entity to perform both mold assessment and mold remediation on the same project. Envirogyn holds separate licenses for consulting (TDLR MAC #1544), remediation contracting (TDLR MRC #1611), and laboratory analysis (TDLR LAB #1050) and enforces a strict project firewall so we act either as your independent assessor/lab OR as your remediation contractor—never both.
Our Texas City microbiology laboratory (TDLR LAB #1050 & AIHA-LAP EMLAP #289849) delivers same-day STAT optical microscopy results within 4–8 hours for local or rush submissions, and standard 24-hour turnkey turnaround for walk-in and mail-in samples via our online eCoC portal.
Yes. Led by Environmental Professionals qualified under 40 CFR Part 312, Envirogyn completes All Appropriate Inquiries (AAI) and ASTM E1527-21 Phase I ESAs—plus ASTM E1903 Phase II subsurface soil, groundwater, and vapor intrusion sampling—for commercial acquisitions, SBA loans, and industrial transactions.
Our ANSI/IICRC S500 and S520 crews dispatch 24/7 from Texas City across Galveston Island, Clear Lake, League City, Brazoria County, and Greater Houston—typically arriving within 30 to 60 minutes for emergency water extraction and structural drying.
Yes. Anyone—including homeowners using our Mold Test Direct™ kits, TREC inspectors, and independent remediation contractors—can submit air cassettes, bio-tape lifts, and bulk samples directly through our digital eCoC portal or in person Monday–Friday, 8:00 AM–5:00 PM at 617 8th Ave N, Texas City, TX 77590.
Following physical cleanup and HEPA air scrubbing under ANSI/IICRC S520, an independent Licensed Mold Assessment Consultant performs post-remediation verification (PRV) visual and air sampling. Once cleared, a Texas Department of Insurance Certificate of Mold Damage Remediation (Form MDR-1) is issued to document statutory clearance for insurers, lenders, and buyers.
Direct line to our Texas City command & accredited laboratory desk: (281) 694-5742. Per Tex. Occ. Code § 1958.155, select your independent division track below.