“A ceiling stain only shows the surface. Thermal imaging and moisture mapping reveal how far it actually spread.”
When water stains appear near an AC vent or ceiling seam, up to 85% of the moisture plume and fungal growth hides on the backside of the drywall. Envirogyn deploys non-destructive infrared thermography, calibrated pin/pinless moisture meters, and our own state-licensed microbiology laboratory to give you scientific proof—with zero conflict of interest.
MLS(ASCP)CM) oversight—not mailed to a slow out-of-state mill.
Look closely at the three diagnostic factors captured in our field video above. A visual walkthrough alone misses the hidden moisture feeding mold colonies inside your ceiling cavity and HVAC ductwork.
Before a remediation crew ever touches a wall, our TDLR-licensed Mold Assessment Consultants (MAC #1544) map the exact perimeter of hidden moisture. Toggle between standard optical vision and FLIR infrared thermography to see how we locate concealed leaks.
To the naked eye, painted drywall and ceiling panels often look intact—or show only a small surface water ring—while moisture migrates laterally across ceiling joists and wall studs.
Select the scenario that best matches your property below to see the exact forensic instruments and laboratory tests our licensed consultants deploy for your situation:
What We Deploy On-Site: FLIR Infrared Camera + Digital Pin/Pinless Moisture Meter + 2–3 Spore Trap Air Samples + 1 Direct Surface Swab/Tape Lift
Lock in this exact diagnostic protocol with our TDLR-licensed consultant team.
BOOK THIS INSPECTION PLAN ↓ Or Call Lab & Field Ops: (281) 694-5742In Texas, it is illegal for the same company to perform both the mold inspection and the mold remediation on a regulated project (≥ 25 contiguous sq ft). Here is why our independent scientific model saves you money:
TDLR LAB #1050) and official TDI Form MDR-1 sign-off.Every Envirogyn Mold Inspection & Testing deployment delivers court-defensible documentation you can hand directly to your family doctor, insurance adjuster, home seller, or remediation contractor:
Includes high-resolution FLIR thermal radiometry images, pin/pinless moisture readings (% WME), quantitative in-house lab spore counts (TDLR LAB #1050) comparing indoor rooms against the outdoor baseline, and—when needed—the state-mandated Mold Remediation Protocol Blueprint specifying exact containment and HEPA air scrubbing requirements.
Following remediation, Envirogyn performs independent Post-Remediation Verification (PRV) clearance testing and executes Section 2 of Texas Department of Insurance Form MDR-1—legally barring insurance carriers from denying coverage or penalizing your property for prior mold damage.
“Another company tried to scare us into a $14,000 tear-out from a ceiling stain. Envirogyn came out with thermal cameras and moisture meters, tested the air in their own lab, and proved it was an isolated AC condensation drip. Saved us over $11,000.”
“Having a Board-Certified Medical Lab Scientist and Veteran running their own mold lab in Texas City is a game changer. We got our thermal moisture map and lab results back within 24 hours before our home option period expired.”
“Pure science, zero sales pressure. They mapped hidden moisture behind our ceiling and drywall that couldn't be seen at all, wrote a rock-solid TDLR protocol, and issued our Form MDR-1 clearance certificate once remediation finished.”
Tell us what you are seeing (ceiling stain, musty odor, leak, or real estate closing). A licensed Mold Assessment Consultant will confirm your inspection scope and same-week appointment window—or call (281) 694-5742 now.
